Hard Drive Degausser & Tape Degausser HD-2XT IRONCLAD
With a 10,000 gauss field, the HD-2XT completely erasures all data on hard drives and tapes in under 8 seconds. IRONCLAD automatically generates a certificate and report to prove it! Garner is the only brand of degaussers and destroyers with IRONCLAD, an erasure, and destruction verification system that automatically captures a JPG image of the media immediately after it is degaussed and generates a proof-of-destruction certificate for audit and archival purposes.
Garner's exclusive IRONCLAD Erasure and Destruction Verification System automatically captures a JPG image of the hard drive immediately after it is degaussed and generates an exportable proof-of-destruction certificate for audit and archival purposes.
Record Detail Screen
IRONCLAD Benefits and Features
10,000 gauss completely erases all data on hard drives and tape in ~ 7 seconds
Tracks and stores media serial numbers, user ID, witness ID, and date in a password-protected system
Provides proof media was degaussed by capturing a JPG image of the hard drive immediately after degaussing
Records gauss field strength
Informs operator of erasure results with a green "PASS" or red "FAIL" after each cycle
Generates exportable JPG images and destruction results for audit and archival purposes in PDF, CSV, and Excel file formats
Operates in 2 modes: "Verification Mode" with prompts for new operators; and "Processing Mode" for faster processing
Operates off a standard wall outlet
Can be installed on existing HD-2 series models that are equipped with USB ports
Best Practices: Degauss Before you Destroy
Physical destruction of hard drives alone leaves data behind (ie. shredding, crushing, piercing, bending)
HD-2XT Degausser completely eliminates all data on the disc platters
After degaussing, physical destruction from the PD-5 physical hard drive destroyer gives visual confirmation that the hard drive has been securely processed and is ready to leave the controlled environment for disposal or shredding
Note: Solid-state media cannot be degaussed. Physical destruction of the media with the SSD-1 solid-state destroyer is recommended prior to the media leaving its secure environment.
Degauss vs. Overwrite
Overwriting is a method where a random pattern of usually "1" and "0" is written to every part of the drive, frequently three times, to obliterate the underlying data. The advantage of this method is the drive can be re-used. The disadvantages are: it takes a skilled operator to ensure the overwriting is done correctly; non-functioning sectors of the hard drive cannot be overwritten allowing data to remain on the drive; it takes a considerable amount of time-hours, and therefore electricity; and it is not regarded as failsafe, or permissible for the highest data security standards such as the NSA, CIA, or DoD.
Degaussing is the process of exposing the media to a strong magnetic field of sufficient strength to magnetically destroy the data. The advantages of degaussing are: a skilled operator is not required to operate a degausser; the magnetic field destroys all the data on the drive in approximately 1/10 of a second regardless of whether the drive is functioning or non-functioning. Degaussing is recognized by the NSA and DoD as an appropriate method of secure data destruction. The disadvantage of degaussing is the hard drive cannot be re-used.
After degaussing, the data on a degaussed hard drive simply no longer exists.
HD-2XT IRONCLAD Includes
Touch Screen Control Head
Image Capture System
Scanner and Stand
Secure and Compliant
The HD-2XT IRONCLAD will help you satisfy the most stringent government and industry standards, including:
NIST SP 800-88r1
CCPA (California Consumer Privacy Act)
DoD Up to Secret Classification
GDPR (General Data Protection Regulation)
GLBA (Gramm-Leach-Bliley Act)
HIPAA (Health Information Portability and Accountability Act)
PCI DSS 3.2 (Payment Card Industry Data Security Standard)
PIPEDA (Personal Information Protection and Electronic Documents Act)
Domestic and International Safety Standards
Garner Products, Inc., leads the data destruction industry in product safety by being the first and only U.S. hard drive degausser and destroyer manufacturer to earn certification of our products to UL, IEC, and CSA safety standards from a Nationally Recognized Testing Laboratory (NRTL).
Our products are also independently tested for conformity to CE standards for safety and emissions for the European Union.
These U.S. and international certifications identify Garner’s products as safe to operate in data centers, hospitals, offices, and other sensitive environments around the world.
We are proud to be an ecofriendly manufacturer in California, the state that sets the standard for environmental protection. At every stage of the manufacturing process, from product design through manufacturing and shipping, we apply processes and use materials that minimize environmental impact.